NCE=0, VLD=0, SAE=0, SGE=0, ECX=0, SOE=0, DBE=0, DOE=0, DAE=0, CPE=0, SBE=0
Error Status Register
DBE | Destination Bus Error 0 (0): No destination bus error 1 (1): The last recorded error was a bus error on a destination write |
SBE | Source Bus Error 0 (0): No source bus error 1 (1): The last recorded error was a bus error on a source read |
SGE | Scatter/Gather Configuration Error 0 (0): No scatter/gather configuration error 1 (1): The last recorded error was a configuration error detected in the TCDn_DLASTSGA field. This field is checked at the beginning of a scatter/gather operation after major loop completion if TCDn_CSR[ESG] is enabled. TCDn_DLASTSGA is not on a 32 byte boundary. |
NCE | NBYTES/CITER Configuration Error 0 (0): No NBYTES/CITER configuration error 1 (1): The last recorded error was a configuration error detected in the TCDn_NBYTES or TCDn_CITER fields. TCDn_NBYTES is not a multiple of TCDn_ATTR[SSIZE] and TCDn_ATTR[DSIZE], or TCDn_CITER[CITER] is equal to zero, or TCDn_CITER[ELINK] is not equal to TCDn_BITER[ELINK] |
DOE | Destination Offset Error 0 (0): No destination offset configuration error 1 (1): The last recorded error was a configuration error detected in the TCDn_DOFF field. TCDn_DOFF is inconsistent with TCDn_ATTR[DSIZE]. |
DAE | Destination Address Error 0 (0): No destination address configuration error 1 (1): The last recorded error was a configuration error detected in the TCDn_DADDR field. TCDn_DADDR is inconsistent with TCDn_ATTR[DSIZE]. |
SOE | Source Offset Error 0 (0): No source offset configuration error 1 (1): The last recorded error was a configuration error detected in the TCDn_SOFF field. TCDn_SOFF is inconsistent with TCDn_ATTR[SSIZE]. |
SAE | Source Address Error 0 (0): No source address configuration error. 1 (1): The last recorded error was a configuration error detected in the TCDn_SADDR field. TCDn_SADDR is inconsistent with TCDn_ATTR[SSIZE]. |
ERRCHN | Error Channel Number or Canceled Channel Number |
CPE | Channel Priority Error 0 (0): No channel priority error 1 (1): The last recorded error was a configuration error in the channel priorities . Channel priorities are not unique. |
ECX | Transfer Canceled 0 (0): No canceled transfers 1 (1): The last recorded entry was a canceled transfer by the error cancel transfer input |
VLD | Logical OR of all ERR status bits 0 (0): No ERR bits are set. 1 (1): At least one ERR bit is set indicating a valid error exists that has not been cleared. |